Dual Action Polyester Pre-filter Pads Feature:
• Unique dual action filter pad improves water clarity
• Traps fine particles that other pads miss
• Can be cut to fit any pond filter
• Each package contains two pads

AP157 contains two dual-action pads.

Easy-to-replace U.V. tubes positioned over the water eliminate problems of safety, scaling, quartz tube replacement and frost damage associated with conventional U.V. clarification.

Fish Mate Pond Filter Features:
• Combined U.V. and biological filtration for crystal clear, purified water. Flip up lid for easy maintenance
• Low maintenance 'frostproof' design. Frostproof quartzless UV chamber ensuring efficient algae clumping and acts as the primary settlement chamber
• High efficiency U.V. chamber with High efficiency UV reflector to magnify the algae-killing effect.
• Colored green to blend in with natural surroundings. Above-ground or in-ground use.
• Featuring UV tubes positioned over the water, thus eliminating problems of scaling, quartz tube replacement and frost damage associated with conventional UV clarifiers
• Comes complete with UV bulb and SUPRA Bio Media filter media
• Includes 3 year guarantee and crystal clear water guarantee
• Filter includes everything to get started: UV light, filter foam etc.

PUMP (sold separately below): Use larger pump than minimum recommended size if adding fountains, waterfalls, or other decorative devices.
226: ponds to 500 gal (8 watt UV), needs pump min. 250 gph
336: ponds to 800 gal (8 watt UV), needs pump min. 500 gph
337: ponds to 1200 gal (16 watt UV), needs pump min. 500 gph
314: ponds to 2000 gal (8 watt UV), needs pump min. 1000 gph
315: ponds to 3000 gal (16 watt UV), needs pump min. 1500 gph
350: ponds to 4000 gal (24 watt UV), needs pump min. 2000 gph
See Recommended Pump (sold separately below).

• Flexible Vinyl Tubing Requirements: (see Vinyl Tubing listed separately below)
• ANI226, 227 - Inlet Hose: 3/4" or 1"; Outlet Hose: 1-1/4"
• ANI314, 315 - Inlet Hose: 3/4", 1" or 1-1/4"; Outlet Hose: 1-1/2"
• ANI237, 239 - Inlet Hose: 3/4", 1" or 1-1/4"; Outlet Hose: 1-1/2"

Fish Mate Bio Pond Filter Features:
• Easy filter maintenance.
• Designed to blend with natural surroundings.
• Complete with high performance SUPRA filter media.
• Suitable for ponds to 1000 gallons.
• Use larger pump than minimum recommended size if adding fountains, waterfalls, or other decorative devices.
  ANI228: ponds to 1000 gal., needs pump min. 500 gph
  
• Actual dimensions approximately 15 x 10 x 5"H

• ANI228 - Inlet Hose: 3/4" and 1"; Outlet Hose: 1-1/4" x 2

These versatile filters work for most ponds and offer the option of installation above or below ground level. The 3000 gallon model is available featuring Powerclenz - the patented automatic cleaning system which enables the filter to be cleaned with the twist of a knob. (See picture below)

LifeGard Tarpon pond filter is designed for heavy fish loads and high flow rates. For ponds 3000-7000 gallons. ...

The Tarpon is optimum in mechanical and biological filtration contained in one piece fiberglass reinforced tank for unmatched strength and durability. Includes Bio-Mate Solid Media Balls that trap debris and provide exceptional growth of beneficial bacteria to biologically clean your pond. (Cultivates nitrifying bacteria, promotes gas exchange, increases dissolved oxygen level and removes harmful gases)

Six position Hi-Flow Valve provides easy control of all filter functions: FILTER, WASTE, BACKWASH, CLOSED, RINSE and RECIRCULATE.

For a complete system add the Base and hose kit with a pump and you are ready to go.

Can be used above or in-ground. However in-ground use requires access to the controls on top AND drain plug on the bottom for winter draining.

Tarpon Pond Filter Features:
• Includes special High Flow Lateral System for pond applications.
• Will not clog when used with Bio-Mate media. (Included)
• Six position Hi-Flow Valve provides easy control of all filter functions.
• Includes a pressure gauge, manual air relief valve and sight glass for easy maintenance
• Bio-Mate media balls provide maximum surface area with the greatest possible mix of air and water.
• High surface area will not clog with organic matter.
• 10 year tank warranty

Biological filtration promotes the growth of beneficial bacteria for a naturally balanced pond and healthy water quality. With Little Giants new biological waterfall filtration units, you can create the beauty of moving water through the sights and sounds of a waterfall or stream. This is not only pleasing to the senses but helps oxygenate the water and promotes a healthy, balanced ecosystem.

Little Giants waterfalls are designed with the latest technology, decreasing maintenance time and providing instant, tool-less access. The intake to the filtration unit is located on the bottom of the system, allowing water to "up-flow" through the BioVort vortex separator plate. BioVort technology creates a centrifugal whirlpool force to separate and settle solid debris for less maintenance. Water then passes through the Matala® filter pads and filtration media capturing micro-organisms for the ultimate in pure pond water filtration.

* WF5 Recomended Pump size - 1000 to 3000gph (see Flex Pump below)
* WF10 Recomended Pump size - 3000 to 5000gph (see Flex Pump below)

Little Giant Waterfall Filter Features:
• Matala pond filter pads last longer and create ideal bacteria counts
• Easy-to-install professional quality biological waterfall filter
• Flexible pipe grommet provides easy inlet connection, replacing difficult bulkhead fittings
• Rust-resistant stainless steel liner attachment ring requires no screwing or silicone
• Back-flush port offers easy maintenance and removal of settling solid bio-loads
• Biological filter media and mesh bag included
• Industrial corrugated wall design
• For ponds 0-10000 gallons
• Lids Sold Separately. Flat Rock is common lid or purchase the actual lid (below).

*2500 gallons per hour is required for effective back flushing.
Do not exceed 4500 gallons per hour

TetraPond Bio-Active Pressure Pond Filter Features:
• Easy-to-maintain pressure filter for ponds and water gardens
• Open profile media cubes have great surface area to maintains efficient pond biological filtration
• Simple backflush feature keeps filter performing in peak condition
• Designed for ponds 1250 to 2500 gallons
• Includes a 18 watt UV Clarifier
• Includes a 2-year limited warranty (excludes bulbs).

Easy-to-install pond filters employ coarse and fine mechanical filter sponges to effectively trap unsightly debris from pond water.

For use with pumps between 200 and 2,000 gallons per hour.

Boost biological filtration in ponds up to 1,000 gallons with a beautiful waterfall. This unit does double duty as an attractive waterfall feature and an efficient biological pond filter.

Unfiltered pond water is directed up and through the included mechanical filter mat and into the bio-media chamber for improved water clarity and quality. In addition to mechanical and biological filtration, the Tetra Pond Waterfall Filter provides beneficial water movement and active aeration to establish a healthy pond environment and to discourage mosquito breeding.

Tetra Pond Waterfall Filter Kit Features:
• Waterfall filter for ponds and water gardens up to 1,000 gallons
• Beautiful waterfall enhances aeration and biological pond filtration
• Efficiently breaks down toxic ammonia and nitrite in pond water
• Measures 19-1/4" x 11-3/4" x 12-1/4" high.
• Great for new pond construction

Tetra FK Pond Filter Kit Features
• Compact fountain filtration kit for ponds 50-500 gallons
• 2-in-1 filter and water fountain kit ideal for pre-formed ponds
• Fountain Assembly Includes 3 fountain heads; swivel adjuster to level fountain heads; diverter assembly with fittings; adjustment value for regulating flow.
• Pre-Filter Keeps small ponds clean. Reduces pump and fountain clogging. Includes coarse and fine pad. Tubing and fittings for pump connection included.
• Submersible Pump:
  • FK3: 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient. 12 Ft Cord
  • FK5: 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient. 12 Ft Cord 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient. 12 Ft Cord
  • FK6: 550 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient. 12 Ft Cord
• Tubing Fits 1", 3/4" and 1/2" ID pond Tubing (fittings included)
• Adjustment valve for regulating flow to fountain head and/or auxiliary water feature.
• Limited 3 year warranty

Pond-building has never been easier. Lifegard All-In-One Submersible Pond Filter System has everything you need to start and maintain your garden pond: Filter, Pump, UV Sterilizer, Fountain Attachments. Installs right out of the box: 1,2, 3. Includes 4 interchangeable fountainheads to add a beautiful and soothing water accent. Beautifies, cleans and maintains a healthy pond from 300 to 1500 gallons.

Lifegard Complete Pond Filter System Features:
• For Ponds or Water gardens from 300 gallons up to 1500 gallons
• Mechanical Filter to remove solids.
• Biological Filter for bacteria growth.
• 9 Watt Ultraviolet Sterilizer to kill free floating algae.
• Quiet One, efficient fountain pump.
• Includes 4 water feature attachments with ball leveling device.
• 15" Long x 15" Wide x 6" High with 25' Pump and UV Power cables.

Skimmer Ultraviolet Clarifier Features:
• Extremely Compact Footprint Fits in the Smallest of Skimmer Chambers
• Fitted with 1-1/2" MPT Inlet and Outlet to Adapt Easily to Most 1-1/2" Pumps
• Included Diverter Valve Regulates Water Flow thru UV
• Includes 2 Couplings, Rotating Union and O Rings
• Includes UV Lamp, quartz sleeve and Transformer with 18ft Long 115V power cord
• 1 Year Limited manufacturer's warranty .

Models designed to handle the clarifying needs of ponds up to 6,000 gallons.
• EUD02915 for ponds up to 1500 gallons to clean green water.
• EUD02925 for ponds up to 3000 gallons to clean green water..
• EUD02945 for ponds up to 6000 gallons to clean green water.

While the filter rests out of sight on the bottom of the pond, the non-obtrusive skimmer floats just below the water surface gulping debris. Skimmer removes pollen, acorns, leaves, and other debris from the surface so no ugly build-up occurs.

Pondmaster Pond Filter / Skimmer Features:
• Suitable for ponds up to 2000 gallons
• Skims debris off of top, middle, and bottom of pond. Removes pollen, acorns, leaves, etc
• Automatically adjusts to changes in water level
• Flow control ring in cover of filter directs water to skimmer or filter
• Coarse polyester media provides mechanical filtration (included), trapping larger particulates
• Reticulated Foam Media provides biological filtration (included) to keep pond water free of ammonia and nitrites
• Versatile design accepts media such as stone, ceramics, and lava rock.
• Convenient handle for taking filter out of water
• No liner cutting or major pond alterations necessary
• Outlet requires 3/4" tubing. Contains 1" flexible tubing for connecting to your pump
• 24"L x 12.5"W x 4"H Filter 6.5" diameter. Max depth 37"
• Use larger pump than minimum recommended size if adding fountains, waterfalls, or other decorative devices.
• Best used with pumps 1800-2400 gph

The 2000, 3000, 6000 and 9000 gallon models are available featuring Powerclenz - the patented automatic cleaning device, which enables the pond filters to be cleaned with just the twist of a knob (details below).